Drilling into profiles for Mitre-Fastening Sets 8 should be performed using special drilling jigs.

Drilling Jig Mitre Connection 8 D14.2 - 0.0.493.72

  • Depth limit stop
  • Notes on Use and Installation

Drilling Jig 8 D14.2 is positioned onto the mitred profile and ensures – irrespective of the cut-off angle – that the 14.2 mm dia. drill hole can be drilled at the right distance from the end face of the profile. The depth limit stop is positioned on the shaft of Step Drill D14.2 to ensure the correct drill depth (26.2 mm).