Home/Shop/Racks & Carts/Conveyors/Roller Conveyor 6 40×40 E D30 with Flanged Wheel ESD

Roller Conveyor 6 40×40 E D30 with Flanged Wheel ESD

SKU: 0.0.662.78

Categories:
,

Description

  • Castor Rail 6 40×40 E, Al, untreated
  • Castor Inserts with Flanged Wheel ESD, PA, black

Roller Conveyor 6 40x40 E D30 with Flanged Wheel ESD - 0.0.662.78
Castor Rail 6 40×40 E is the basic profile for building Roller Conveyors 6 40×40 E.
The outer geometry, which is similar to a groove, is designed exclusively for accommodating Roller Conveyor 6 40×40 E Guide

Additional information

Weight N/A
Dimensions N/A
Line

Line D30

Delivery unit

cut-off length 2 ft, cut-off length 4 ft, cut-off length 6 ft, cut-off length 8 ft

Weight, spec. Length

m = 1.32 kg/m

ESD

Yes

More details

The practical Roller Conveyor 6 40×40 E can now do even more!
All roller elements are now available in an ESD-safe version which means that sensitive goods (and employees) can be protected against static charging during transport. Rollers D11 can be used to create very smooth-running conveyor lines. Their tight roller spacing provides continuous, even support for small and sensitive goods along the entire line. This minimizes vibration and ensures that even soft-bottomed cardboard boxes can be conveyed.

Roller Conveyor 6 40×40 E is delivered fully assembled with your desired roller elements. In addition to compact Rollers D11, you can also choose from strong Castors D30 with and without flanged wheels and side-by-side, offset Castors D30/2. Castors D30 in red, yellow, green and grey can be used to create visual indicators.

The following applies to all roller elements: They can be changed without tools and without having to remove other roller elements.

The rigid roller conveyor exhibits extremely good load-carrying capacity, even over long stretches. A Line 6 groove on the underside is used to fasten the profile to the frame. The friction-based connection gives the frame added strength.
The groove can also be used to fasten the profile to panel elements so as to protect the floor or lower-level roller conveyors from soiling.

Permissible force

The relevant statutory regulations, such as DGUV standards, must be adhered to when building racks. Please note that the load carrying capacity of item Roller Conveyors can exceed the capacity of other components.
The maximum deflection (f) item recommends for two parallel Roller Conveyors is:
f < 1/100 a
Caution:
Note the maximum load-carrying capacity of the components involved.
Permissible force on a single roller element in Roller Conveyor 6 40×40 E D30:
F < 100 N
Permissible force on a single roller element of Roller Conveyor 6 40×40 E D30/2:
F < 50 N

Classifications

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems.
Do you need the classification data for all item products for your e-procurement system?
If so, please don’t hesitate to contact us.

eCl@ss 4.0
36121505
eCl@ss 4.1
36121505
eCl@ss 5.0 36129190
eCl@ss 5.1 36129190
eCl@ss 6.0.1
36120407
eCl@ss 7.1 36120407
eCl@ss 8.0 36120407
UNSPSC 7.0 24101709
UNSPSC 9.0 24101709
Customs Tariff Number
84283920

Special Features

Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.
EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.
These include batteries, etc.
All substances are registered according to the REACH regulation.
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) ensures that users
have accurate information on the type and properties of operating materials, lubricants, etc.
that they might come into contact with.

Roller Conveyor 6 40×40 E D30 with Flanged Wheel ESD

SKU: 0.0.662.78

Categories:
,

Description

  • Castor Rail 6 40×40 E, Al, untreated
  • Castor Inserts with Flanged Wheel ESD, PA, black

Roller Conveyor 6 40x40 E D30 with Flanged Wheel ESD - 0.0.662.78
Castor Rail 6 40×40 E is the basic profile for building Roller Conveyors 6 40×40 E.
The outer geometry, which is similar to a groove, is designed exclusively for accommodating Roller Conveyor 6 40×40 E Guide

Additional information

Weight N/A
Dimensions N/A
Line

Line D30

Delivery unit

cut-off length 2 ft, cut-off length 4 ft, cut-off length 6 ft, cut-off length 8 ft

Weight, spec. Length

m = 1.32 kg/m

ESD

Yes

More details

The practical Roller Conveyor 6 40×40 E can now do even more!
All roller elements are now available in an ESD-safe version which means that sensitive goods (and employees) can be protected against static charging during transport. Rollers D11 can be used to create very smooth-running conveyor lines. Their tight roller spacing provides continuous, even support for small and sensitive goods along the entire line. This minimizes vibration and ensures that even soft-bottomed cardboard boxes can be conveyed.

Roller Conveyor 6 40×40 E is delivered fully assembled with your desired roller elements. In addition to compact Rollers D11, you can also choose from strong Castors D30 with and without flanged wheels and side-by-side, offset Castors D30/2. Castors D30 in red, yellow, green and grey can be used to create visual indicators.

The following applies to all roller elements: They can be changed without tools and without having to remove other roller elements.

The rigid roller conveyor exhibits extremely good load-carrying capacity, even over long stretches. A Line 6 groove on the underside is used to fasten the profile to the frame. The friction-based connection gives the frame added strength.
The groove can also be used to fasten the profile to panel elements so as to protect the floor or lower-level roller conveyors from soiling.

Permissible force

The relevant statutory regulations, such as DGUV standards, must be adhered to when building racks. Please note that the load carrying capacity of item Roller Conveyors can exceed the capacity of other components.
The maximum deflection (f) item recommends for two parallel Roller Conveyors is:
f < 1/100 a
Caution:
Note the maximum load-carrying capacity of the components involved.
Permissible force on a single roller element in Roller Conveyor 6 40×40 E D30:
F < 100 N
Permissible force on a single roller element of Roller Conveyor 6 40×40 E D30/2:
F < 50 N

Classifications

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems.
Do you need the classification data for all item products for your e-procurement system?
If so, please don’t hesitate to contact us.

eCl@ss 4.0
36121505
eCl@ss 4.1
36121505
eCl@ss 5.0 36129190
eCl@ss 5.1 36129190
eCl@ss 6.0.1
36120407
eCl@ss 7.1 36120407
eCl@ss 8.0 36120407
UNSPSC 7.0 24101709
UNSPSC 9.0 24101709
Customs Tariff Number
84283920

Special Features

Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.
EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.
These include batteries, etc.
All substances are registered according to the REACH regulation.
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) ensures that users
have accurate information on the type and properties of operating materials, lubricants, etc.
that they might come into contact with.

Title

Go to Top